Wind Energy Conversion Systems
DOI:
https://doi.org/10.34630/neutroaterra.vi32.5545Keywords:
electromechanical conversion of wind energy, wind generators, DC Machine, synchronous machine, induction machineAbstract
Introduction: The production of electricity from wind energy presents an increased growth and sustained since 1985. Currently, there are wind generators located throughout the world whose power already reaches values exceeding 250 GW. The main technologies used in electromechanical conversion of wind energy into electric energy are based primarily on three types of electric machines: • The direct current (DC) machine; • The synchronous machine; • The induction machine. These machines work on the principles of the electromagnetic actions and reactions. The resulting electromechanical energy conversion is reversible. The same machine can be used as the motor for converting the electrical power into mechanical power, or as the generator converting the mechanical power into electrical power. Typically, there is an outer stationary member (stator) and an inner rotating member (rotor). The rotor is mounted on bearings fixed to the stator. Both the stator and the rotor carry cylindrical iron cores, which are separated by an air gap. The cores are made of magnetic iron of high permeability, and have conductors embedded in slots distributed on the core surface. Other way, the conductors are wrapped in the coil form around salient magnetic poles. In the Figure 1 is possible to see a cross-sectional view of the rotating electrical machine with the stator with salient poles and the rotor with distributed conductors. The magnetic flux, created by the excitation current in one of the two members, passes from one core to the other in the combined circuit always forming a closed loop. The electromechanical energy conversion is accomplished by interaction of the magnetic flux produced by one member with electric current in the other member. The induced current is proportional to the rate of change in the flux linkage due to rotation.
References
Almeida,R. G.; Peças Lopes, J. A. & Barreiros, J. A. L. Improving Power System Dynamic Behaviour Through Doubly Fed Induction Machines Controlled by Static Converter Using Fuzzy Control. IEEE Transactions on Power Systems, Vol.19, No.4, (November 2004) pp. 1942-
Ekanayake,J. B.; Holdsworth, L.; Wu, X. & Jenkins, N. Dynamic Modeling of Doubly Fed Induction Generator Wind Turbines. IEEE Transactions on Power Systems, Vol.18, No.2, (May 2003) pp. 803-809.
Castro,R. Uma Introdução às Energias Renováveis: Eólica, Fotovoltaica e Mini-Hídrica. 2ª Edição. IST PRESS, 2016.
Brandão, R.M.; Carvalho, J.B. & Barbosa, F.P.M. Wind Energy Technology. Renewable Enegy 2009-In-tech, pp.505-530
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Neutro à Terra
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.